Winlog Forum

Hi,
for the float format there is the function to directly read the register to 4 words. For the int format instead you can read it as 2 int32 (2 x 2 register) and through the Winlog code insert the value in a DOUBLE gate.

Regards

Hi,
thanks for reporting, the problem has been identified and will be fixed in the next version.

Regards

Hi, please install the latest version of Winlog EVO available on www.sielcosistemi.com and try the conversion again.
If you still have problems write to support[at]sielcosistemi.com attaching your application.

Best regards

Dear Sir,
please explain your request better.

Regards

Simple project that shows how to interface with a MySql or MariaDb database through the functions of the Winlog Evo code.

Demo_MySql.zip: (87.25 KiB) Downloaded 2625 times

Hi,
in winlog use function 35 or 37 for read 32bit integer or 33 and 36 for floating point 32.
See Modbus help on protocol guide.

: reg32.png (41.59 KiB) Viewed 3550 times

Best regards

Hi,
holding register or nput register?
Have you tried to read the help of the modbus protocol? What functions have you tried?

Regards

Hi,
what type of register do you read?

Regards

Dear Sir,
what is your Winlog version? Usually this type of problem is related to an antivirus blocking files.

Regards

Hi, your system is correct. Another method is to modify the Templates using the code. If you have noticed the Template files are text files where in the first lines you find the gates used inside. With a simple routine that reads and writes from files you can replace the gates. To answer your questi...

Hi,
there is a space in "Nome" field.

: Immagine.png (16.38 KiB) Viewed 2551 times

Best regards

Hi,
all templates must be set as "Fixed no border", you can set this configuration from template properties in Template Builder.
in the project options you can decide what to show and what not. all menus and title can be hidden, the alarm bar cannot be removed.

Best regards

Hi,
the error appears if the gates file is not found. You probably haven't added any gates in the project you exported.

Best regards

Hi,
Are you using the new Winlog Evo?

Dear Sir,
the excel format is proprietary and cannot be replicated. You can create a csv file that Excel recognizes automatically.

Regards

Dear Sir, about your question: What is the difference with Winlog EVO V4... ? The two versions have a similar structure and user interface, but differ in terms of performance and types of licenses. The table below highlights the differences between the two versions in terms of performance. http://ww...

Dear Sir,
the problem you describe in point 1 is very strange, I think there is some other problem.
Winlog 3.02.08 it's a pretty old version, now we're at version 3.02.34.

I ask you to send your application to support [at] sielcosistemi.com

Regards

Hi,
It returns the text of the specified object. See demo attached.

Regards

Hi,
the IME Conto and IME Nemo series devices normally communicate in Modbus.
You can use the Modbus RTU and Modbus TCP protocol in ProjectManager -> Configuration -> Channel.

Best regards

Hi,
can you be more specific and explain what you want to do?

Thanks

Hi,
for specific demo request contact support[at]sielcosistemi.com

Regards

Hi, first of all you have to say which version of Winlog you are using. If you are using version 3.02: - you can create reports in DAT format and add the extension of your choice (e.g. CSV). - The file name is up to you and there is no limit to the number of files created. - To create histograms you...

Dear Sir,
it's not possible to save a file from code with the histView object. However, you can extract historical data directly from the code using the "HistDbGet" functions. See the Code Builder help for more information.

Regards

Dear Sir,
go in Project Manager, enter your project and in the Report section create csv, dat or txt files with timed recordings.

Best regards

Hi,
which version of Winlog are you using?

Regards

Dear Sir,
is not possible to create communication protocols by code. For special developments I ask to write to support[at]sielcosistemi.com

Regards

Dear Sir,
have you installed usb driver for converter?

Please post your application for check.

Thanks

Hi, please post your Winlog Project and TIA portal project. We can try your configuration.

Best Regards

Hi,
can you give additional information? TIA Portal configuration, Winlog gate configuration, ...

Thanks

Step-by-step guide to configure IOlog SS3000 modules using Winlog

How To Configure IOlog SS3000 Modules In Modbus RTU (Video)
How To Configure IOlog SS3000 Modules In Modbus TCP (Video)

Configuring IOlog SS3000 modules (Pdf doc)
Configuratore per moduli SS3000 (Pdf doc)

Hi,
please send your application to support[at]sielcosistemi.com

Thanks

Hi,
I need some information:
- Which version of Winlog are you using?
- Are you using the PRO version or the LITE version?

Thanks

Hi,
when there are events to filter, the button is enabled. Start and stop of the supervision session are always visible.

Regards

Dear Sir, about your question: 1 - Winlog supports ODBC drivers, with these drivers you can connect to any database that supports ODBC. 2 - Winlog can expose its variables but can only be read by another Winlog installed on the network or in a remote location. Communication is encrypted and cannot s...

Thanks for the tip. It will be corrected in one of the next versions.

Best Regards

Hi,
please post your application for test.
What is your exact version of Winlog?

Hi, see code: function void System_On() #startup SetDigGateValue("Run_Feeder",1, 0); // Reset Feeder Run Signal SetDigGateValue("System_Active",1, 1); // Set System Active bit int i; bool verify = false; while (verify == false) // wait while comunication go "ok" verify ...

Hi, try this code: function void System_On() #startup SetDigGateValue("Run_Feeder",1, 0); // Reset Feeder Run Signal SetDigGateValue("System_Active",1, 1); // Set System Active bit while (GetDigGateCommunicationStatus("Loaded",1) == false) // wait while comunication go ...

Hi,
What kind of report are you using?

Regards

Dear Sir,
before executing a project created with Winlog Lite it is necessary to open and save gates (numeric, digital or string). In this way the checksum license is created with the dongle inserted.

Regards

Dear Sir,
can you please attach your application?

Thanks

Dear Sir,
can you plese post here your test application?

Thanks

Sorry, you're right. We verify the problem and it will be solved in the next Winlog release.

Thanks

Dear Sir,
it's not a bug, you can't use these shortcuts in Winlog.

Best regards

Dear Sir,
we found the problem, it will be solved in the next Winlog release.

Thanks
Best regards

Hi,
Which Winlog version are you using?
I test alarm with 3.02.19 and there isn't any problem regarding this.

Regards

Hi,
no, is not possibile.

Best Regards

Hi, directly by event is not possible. You need to create a history using the code and the functions "GetEvnGateValue", you can also save data to file using functions "FileOpen", "FileWriteLn", ....

Regards

Hi, currently is not possible. What do you have to do?

Hi, the square means that the gate is in communication error.

Best regards

Search found 373 matches